Nfc Pairing - switel TV-L2BT Bedienungsanleitung

Establishing a Multi-point connection
(using an audio source and a mobile phone simultaneously)
1 Turn on the transmitter, plug the main adaptor to the wall outlet and connect to
the transmitter first, then power ON the headset receiver, press the "PAIR"
button of the transmitter and headset receiver, then the transmitter and the
headset receiver will be paired automatically in few seconds.
2 Unplug the main adaptor to turn off the transmitter, then press and hold the
headset receiver "PAIR" button for about 5 seconds, the blue LED on the
headset receiver flashes quickly.
3 Turn on Bluetooth function of your mobile phone and scan for Bluetooth
devices. Select TV-L2BT to connect the headset receiver to the mobile phone.
4 Switch OFF the Bluetooth function of your mobile phone. Plug the main
adaptor to turn on the transmitter again, the transmitter and the headset
receiver will be connected automatically.
5 Turn ON the Bluetooth function of your mobile phone again, then select
TV-L2BT on the mobile phone screen to connect the headset receiver.
6 Now, the Multi-point connection is completed, you can now receive and
answer mobile phone call with the same headset receiver while watching TV
or movie with the transmitter connected to TV, HiFi or CD.

NFC pairing

If your sending device (e.g. your mobile phone/smartphone) supports NFC (Near
Field Communication), turn on the NFC function and turn on the headset receiver.
Attach the headset receiver's area marked with the NFC-Logo (
possible to the relevant area on the transmitter for a few seconds. It will then
activate the Bluetooth function and pair with each other automatically.
The PHONE button
Do you have your receiver connected to a mobile phone / smartphone, you can
answer or end a phone call by briefly pressing the phone button. When an
incoming call is received the ringing tone from the mobile phone will be
transmitted to the headset which in turn will be heard in the earpieces. Press and
), as near as
21