Simco CM lite Bedienungsanleitung Seite 30

8. Fit the cover earthing.
9. Position the cover carefully on the generator. Make sure the transparent flat cable is pressed
down and, therefore, does not get stuck.

Attention:
Use only the supplied fasteners to fix the bracket (fastening screws M4x8) to the CM.
-
Do not route high voltage cables next to any sharp metal components and take care
-
to avoid sharp bends and kinks in the cable.
Keep high-voltage cables separated from low-voltage wiring.
-
Keep high-voltage cables as short as possible.
-
CMLite_UM_9752090250_NL_D_GB_F_V2_2
GB
29