Material Specifications; Machine Specifications - SEAL 62S Betriebsanleitung

3.3

Material specifications

Maximum width:
Process up to 50°C (122 °F)
Process up to 125°C (257 °F)
Maximum roll diameter:
Material unwind
Release liner wind-up (upper wind-up)
Release liner wind-up (lower wind-up)
Maximum panel thickness:
Roll core inside diameter:
3.4

Machine specifications

Power supply requirements:
62S
62S (US/CAN)
For the correct supply voltage version refer to the identification label on the machine.
Standard number of shaft positions:
Material unwind
Release liner wind-up
Unwind/wind-up
Optional features:
Extra plot unwind for 2" and 3" cores (customer installable)
Easy Feed in-feed table (factory installed)
Nip setting:
Pressure:
Process speed:
Maximum
Slow mode
Maximum roller temperature:
Noise level
Specifications
Metric
1575 mm
1524 mm
305 mm
180 mm
200 mm
38 mm
76.2 mm
1N/PE 230VAC +/- 10%, 50/60Hz, 16A
2W+G 230VAC +/- 10%, 50/60Hz, 16A
1 (auto-grip)
1 (auto-grip)
2 (auto-grip)
0–40 mm
1–2.5 N/mm 5.71–14.28 lbf/in.
6 m/min
0.6 m/min
140
<70 dB(A)
American
62 in.
60 in.
1 ft.
6 in.
8 in.
1.5 in.
3 in.
9
0–1 / in.
16
20 ft/min
2 ft/min
°C 284 °F
15