Troubleshooting - Omni Bead Ruptor 4 Benutzerhandbuch

Error Codes
Error Code Definition
Display screen
Error 1
incomplete or
unusual characters
No display on the
Error 2
Unit powers on but
Error 3
motor does not turn
Error 4 Close Door

Troubleshooting

shows CPU needs to be
screen
Faulty display screen
Faulty motor
Lid is not seated
Detection system
Cause
Turn off the unit. Wait 30 seconds.
reset Turn the unit back on.
Check main voltage.
Check that the voltage of the unit (100V-240V)
matches what is being delivered by the main
No Power
power supply.
Make sure the unit is plugged in properly.
Check and replace fuses if blown.
Turn off the unit.
Contact manufacturer for assistance.
Contact manufacturer for assistance.
properly.
Check Lid latch for obstruction
Press lid and ensure the handle is closed
is faulty.
Possible Solution