Omni Bead Ruptor 4 Benutzerhandbuch Seite 10

Transporting the Bead Ruptor 4
The Bead Ruptor 4 must be shipped in its original packaging.
1.
2.
1.
Before transporting please follow this steps.
2.
Remove all tubes, cover the unit in its plastic bag.
The tube carriage will slide back. Lift the tube carriage
to align the motor mount holes to the holes in the
base plate.
Insert screws with allen key until you feel them
engage (It may take some finesse to get them aligned
with the internals of the unit).
Tighten screws until completely seated.