Description; Introduction; Package Contents; Optional Accessories - Harman AKG DMM 4/2/2 Bedienungsanleitung

2 Description

Introduction

Package contents

Optional Accessories

Brief description

DMM 4/2/2 DMM 4/2/2
DMM DMM 4/2/2 4/2/2
Thank you for purchasing an AKG product. This Manual contains important instructions for
setting up and operating your equipment. Please take a few minutes to read the instructions
below carefully before operating the equipment. Please keep the Manual for future
reference. Have fun and impress your audience!
Please check that the package contains all the parts. Should anything be missing, please
contact your AKG dealer.
• 1 x DMM 4/2/2
• 4 x screws for rack mounting
• 4 x plastic washers
• 1 x mains plug
• 1 x Quick Setup Guide
For optional accessories, refer to the current AKG catalog or folder, or visit www.akg.com.
Your dealer will be glad to help.
The DMM 4/2/2 is a 19" Automatic Microphone Mixer. The internal signal processing is digital
and mono. The inputs and outputs are analogue.
The unit has four balanced inputs, which can be configured as microphone inputs or as line
inputs (e.g. for receivers of wireless microphones). These are electrically mono. Furthermore,
two unbalanced AUX inputs are also present.
On the output side, the unit has a balanced master output and an unbalanced dual mono
recording output.
The inputs and outputs are controlled using the rotary controls and LED rings on the front
panel. The unit has a wide-range power supply unit and is connected to the mains using the
supplied power cord.
In addition to many DSP functions for signal processing, the DMM 4/2/2 also has innovative
automatic mixing functions. These mixing functions may be configured by means of hardware
remote control.
If the four balanced inputs are not sufficient for your needs, up to five DMM 4/2/2 can be
daisy-chained.
Description
29