Time And Date; Daylight Saving Time; Eco Mode; Menu Lock - BADU BNR 300 Montage & Betriebsanleitung

6.4. Time and date

This menu is used to set the current time and date.
For analysis of the system data it is essential that the time is set accurately on the
controller. Please note that the clock has a 24 hour battery reserve if the mains
voltage is interrupted and must therefore be reset afterwards.

6.5. Daylight saving time

When this function is active, the controller's clock changes automatically to and from DST (day-
light saving time).
Setting range: yes, no/Default: yes

6.6. Eco mode

When this function is active, the controller's backlight is automatically switched off when no
button has been pressed for 2 minutes.
Setting range: yes, no/Default: yes

7. Menu lock

The menus listed below remain completely accessible despite the menu lock being activated
and can be used to make adjustments if necessary:
1. Measurements
2. Analysis
3. Display mode
7.2. Time and date
8. Menu lock
9. Service values
To lock the other menus select "Menu lock on".
To enable the menus again select "Menu lock off".
Setting range: on, off/Default: off
24
Special functions
Menu lock
The menu "8. Menu lock" can be used to secure
the controller from unintentional changing of
the set values.
The menu is closed by pressing the "esc" key
or selecting "Exit menu lock".