EDNord AutoUltima Pro Bedienungsanleitung Seite 8

AutoUltima Pro – Load Film
USE INSTRUCTIONS BELOW TO LOAD NEW FILM IF COMPLETELY EMPTY.
AutoUltima Pro – Status Message
Laminator comes pre-Ioaded with 75mic film, Approximately 90 metres.
Standby Screen.
Counting screen,
showing pages
laminated so far.
8
Screen
Start Stop
Enter
EDNord - Istedgade 37A - 9000 Aalborg - telefon 9633 3500
First, complete steps 2, 3 and 4
1
from "Load Film" page 7. Close 4
EZ levers.
Press "Feed" switch (forward)
2
and insert "Feed Card" as shown.
Insert card with slight force
through film rollers.
3 Insert Idler Bar Assembly. Continue
pressing feed switch and wait for
clear, wrinkle-free lamination.
Close top cover, scroll up or down
4
to select film thickness. Press
"Enter" to confirm. Press "Start" to
resume lamination.
Load document(s) to
be laminated.
Job complete screen.
Total pages laminated.
Machine is in heat
mode. Machine is
warming to operating
temperature.