EDNord AutoUltima Pro Bedienungsanleitung Seite 6

AutoUltima Pro - Setup
Laminator comes pre-Ioaded with 75mic film, Approximately 90 metres.
Enter
Tray
AutoUltima Pro - Setup
Laminator comes pre-Ioaded with 75mic film, Approximately 90 metres.
Side
Guides
Screen
Start Stop
Enter
6
In back of machine turn on power.
1
Power light LED front control panel
lights up.
First time only, scroll up or down
2
to select language setting, then
press "Enter". To reset language,
hold down both scroll buttons for
5 seconds, select language then
press enter.
3 Open tray for normal operation. For
longer paper or banners close tray.
Adjust paper side guides and place
1
document(s) in feed tray.
Press start and lamination will
2
begin after warm up.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 9633 3500
Side
Guides
Screen
Start Stop
Enter
Insert and secure feed tray into
4
position.
Adjust "Paper Side Guides" to fit
5
document(s).
Laminated document(s) will stack
3
in Exit Tray. Lamination will stop
when job is complete.
LCD screen will display number of
4
documents being laminated.