Inhaltsverzeichnis - Astralpool BASIC Handbuch

Alarm
Level
OFA First Alarm (time >70%)
OFA Second Alarm (time =100%)
Flow Rate
System Error
Calibration Funciont
Default parameters:
Language = UK
Set Point value= 7,4 pH; 750mV (Rx)
Dosing Method = Acid; Low (Rx)
Time OFA = OFF
Calibration = 7/4 (2 point); 465mV (Rx)
Flow Input= OFF
Code 0000137051
Display
Level____7,2_ph
OFA_Alarm__7,2_ph
OFA_STOP___7,2_ph
Flow_______7,2_ph
Parameter_Error
Error_7_ph
Error_4_ph
Error_465_mV
To restore Default parameters run Following steps:
rev. 1.0
Relay
Alarm Relay
Close
Alarm Relay
open
Alarm Relay
Close
Alarm Relay
open
Alarm Relay
Open
Alarm Relay
open
Power off Pool Basic unit
Keeping Press UP and DOWN Key switch on the
Power.
Init.default__no
The unit will flash
Init.default__Yes
Press up
Enter Key to restore Default parameters.
Light bulb E.V.
Actions to do
- Push Enter Key to open
Alarm Relay
- Restore Product tank
- Push Enter Key to reset
- Push Enter Key to reset
- Restore Flow Rate
- Press Enter Key to replace
Default parameter
- Destroy Unit
- Restore Probe or Buffer
solution and repeat calibration
function
4