Flow - Astralpool BASIC Handbuch

Language

Flow

Setpoint____7.4ph
o
o
Adjust value with
Setpoint_Type__Acid
o
OFA_Time_____off
o
Calibration___7/4pH
o
Man_Temperature_25°C_
o
Save and escape Program setup with ESC key
Exit______save
o
Priming Pump Keep Press
Priming
o
Code 0000137051
(It's possible to have 5 language EN, IT, SP, DE, FR
Adjust value with
It's possible to enable(ON) or disable (OFF) signal input
and
It's possible to adjust from 0 to 14 pH value and 0 to 1000 mV for Redox
Adjust value and
It's possible to adjust Acid or Alkaline dosing and High or Low for Redox
Adjust value and
It's possible to adjust OFA time in minutes
Adjust value and
It's possible to select 2 points 7 and 4 pH, 1 point only 7pH or function disable; for
Redox function disable only.
Adjust value and
pH measure only.
Adjust value with
for 3 seconds
and
up or down key and confirm with
rev. 1.0 2