To turn on the unit for the first time, follow these steps:
1. Remove the customer display cover on the back of the unit by
sliding it backward.
2. Find the main power switch, using the illustration at the front
of this manual if necessary.
3. The switch has two sides, one with a line and one with a circle.
Turn the power on by pressing the side of the switch with the
line on it.
4. Replace the customer display cover.
After turning on the main power switch, you should use only the
front power switch for day-to-day operation.
LEDs
❏
Power LED
Indicates the power on/off status
Green
Orange
Off
❏
HDD LED
Indicates the access status of the HDD and other storage
devices
Green
❏
CD-ROM Access LED
Indicates the CD-ROM access status
Green
❏
FDD Access LED
Indicates the FDD access status
Green
❏
MSR Access LED
Indicates the MSR card access status
Green
Orange
Handling Guidelines
❏
Clean the touch panel with a dry soft cloth or cloth moistened
with ethyl alcohol.
Power on/Normal operation
Power is suspended
Power off
HDD, CD-ROM, or CompactFlash is being accessed
CD-ROM is being accessed
Floppy disk is being accessed
Reading is performed correctly
A read error has occurred
SR-600 User's Manual 9
English