Epson SR-600 Bedienungsanleitung Seite 11

LCD Unit Angle Adjustment
The angle of the LCD unit is adjustable. Follow the steps below to
change it:
CAUTION:
Do not adjust the LCD unit angle when the CD-ROM drive tray is open.
The CD-ROM drive may be damaged. Make sure that the CD-ROM
drive tray is fully inserted into the CD-ROM drive before performing the
following procedure.
1. Adjust the angle of the
LCD unit while pulling
the lever on the right side
of the case.
2. Release the lever when
the LCD is at the angle
you want.
3. Move the LCD unit
slightly up or down until
you hear it click into
place.
LCD Adjustments
DM-LS121S contrast adjustment
You can adjust the contrast of this
LCD by pressing the LCD buttons.
Press the left button to increase
the contrast. Press the right button
to decrease the contrast. Once you
set the LCD contrast, the new
setting is saved even if you turn
off the SR-600.
DM-LS121T backlight brightness adjustment
You can adjust the backlight brightness by pressing the backlight
brightness buttons. Press the left button to make the backlight
darker. Press the right button to make the backlight brighter. The
new setting is saved even if you turn off the SR-600.
SR-600 User's Manual 11
English