Speaker Volume Adjustment - Epson SR-600 Bedienungsanleitung

CD-ROM emergency ejection
When the CD-ROM drive
does not function properly
and you cannot take out a
CD-ROM, follow the steps
below:
1. Turn off the front power
switch.
2. Push the CD-ROM eject
hole with a pointed
object such as a pen. The tray will come out slightly.
3. Pull the tray out gently as far as it will go.

Speaker Volume Adjustment

To adjust the speaker volume,
follow the steps below:
1. Open the front switch cover.
2. Turn the volume control to
the left to turn down the
volume. Turn it to the right to
turn up the volume.
Reset
Reset is necessary only when the SR-600 is not responding.
CAUTION:
Never press the reset switch unless the software is not responding. When
the system is reset, all unsaved data is lost.
Perform a reset by following the
steps below:
1. Do not turn off the unit.
2. Open the front switch cover.
3. Push the reset switch with a
pointed object such as a pen.
The SR-600 restarts
automatically.
SR-600 User's Manual 13
English