Epson TM-L90 Benutzerhandbuch Seite 13

paper cover, and remove the paper dust, adherent glue, or other foreign
substance with a cotton swab or cloth moistened with an alcohol solvent
(ethanol or IPA).
If paper dust adheres around the black mark sensor, blow or wipe it off to keep
the operation of the printer normal.
For the locations of each part, see the illustration.
CAUTION:
If adherent glue is attached, be sure to wipe it all off.
Take care not to injure your fingers on the manual cutter when cleaning.
Before turning on the printer after cleaning, allow alcohol on the printer to dry
completely.
The thermal head can be very hot after printing. Be careful not to touch it and to let it
cool before you clean it. Do not damage the thermal head by touching it with your
fingers or any hard object.
<Locations for the autocutter blade, platen roller, and paper path>
Wipe off all glue on
these edge and ribs.
Blow or wipe off the
paper dust around the
black mark sensor.
Platen roller
CAUTION:
Autocutter blade
Wipe off all glue in the touchable
area of the autocutter and the
platen roller.
TM-L90 User's Manual 13
Paper path