Epson TM-L90 Benutzerhandbuch Seite 5

TM-L90 Specifications
.
Print method
Dot density
Print width
Paper dimensions
Paper type NCR Full
Coate
NCR Lane
coated
1
Power supply*
Current consumption
Temperature NCR
NCR Lane
coated
Humidity
Overall dimensions
Weight (mass)
dpi: dots per 25.4 mm (dots per inch)
*1: Be sure to use a safety-standards-applied power source that meets the following specifications.
Rated output: 24 V/2.0 - 10.0 A or more, Maximum output: 240 VA or less
Default Delay Times for Power Management for Epson Products
This product will enter low power (sleep) mode after a period of nonuse. The time interval has been set at the factory to
ensure that the product meets Energy Star standards of energy efficiency and cannot be modified by the consumer.
The power consumption in the sleep mode and power off mode when using the AC adapter PS-180 is described below.
Sleep mode
AC 230V
50 Hz
Power off mode
Sleep mode
AC 115V
60 Hz
Power off mode
80 mm paper width
Thermal line printing
203 dpi × 203 dpi [dots per 25.4 mm {1"}]
72 mm {2.84"}, 576 dot
positions
79.5 ± 0.5 × max. Ф102 mm
{3.13 ± 0.02 × 4"}
Thermal paper:NTP080-80
Linerless label paper:
9023 - 0839 (12 roles)
Thermal paper:NTP080-80
Linerless label paper:
9023 –1274 (6 roles)
9023 –1253 (12 roles)
DC+24 V ± 7%
Approximately 1.8 A
Operating: 5 to 45°C {41 to 113°F}
Storage: –10 to 50°C {14 to 122°F} (except for paper)
Operating: 5 to 35°C {41 to 95°F}
Storage: –10 to 50°C {14 to 122°F} (except for paper)
10 to 90%
140 × 203 × 148 mm {5.51 × 7.99 × 5.83 "} (W × D × H)
Approximately 1.9 kg {4.19 lb}
Serial/USB
model
(when using the
Serial port)
0.9 W
0.4 W
0.7 W
0.3 W
58 mm paper width
52.5 mm {2.07"}, 420 dot
positions
57.5 ± 0.5 × max. Ф102 mm
{2.26 ± 0.02 × 4"}
Thermal paper:NTP058-80
Thermal paper:NTP058-80
Linerless label paper:
9023 –1823 (12 roles)
9023 –1397 (30 roles)
Parallel/USB Serial/USB
model
(when using the (when using the
Parallel port) USB port)
1.0 W
0.4 W
0.9 W
0.3 W
English
40 mm paper width
35 mm {1.38"}, 280 dot
positions
40.0 ± 0.5 × max. Ф102 mm
{1.57 ± 0.02 × 4"}
Linerless label paper:
9023-1055 (12 roles)
Linerless label paper:
9023 –1275 (6 roles)
9023 –1257 (12 roles)
Ethernet/USB
model model
(when using the
Ethernet port)
0.7 W 1.6 W
0.4 W 0.4 W
0.6 W 1.4 W
0.3 W 0.3 W
5