Cleaning, Storage And Maintenance - EASYmaxx N1C-100JS Originalanleitung

Vorschau ausblenden

Inhaltsverzeichnis

Verfügbare Sprachen

■

Always move the device forwards when it is switched on. Never drag the device when

it is switched on!

■

When working with the device, never linger on one spot for too long. Always keep

moving.

■

Always guide the device with two hands.

It is impossible to prevent the impact of noise from this device. Take periods of

rest.

1. Familiarise yourself with all of the features and functions of the device.

3. Connect the mains plug of the device to the extension cable.

4. Plug the mains plug of the extension cable into a plug socket that has been properly

installed. The socket must also be readily accessible after connection so that the

connection to the mains can quickly be isolated.

5. Place the device on the ground and align it so that the open side of the protective

guard (2) is parallel with the ground.

6. Hold the device securely with two hands on both handles (13, 15) and maintain a

sufﬁ cient distance from the device or brush.

7. Switch on the device: Press down the release button (14) and the On / Off switch (12)

at the same time and keep the On / Off switch pressed down.

8. Move the device at an even speed over the crevices which are to be cleaned.

Repeat this step if necessary for more stubborn dirt.

9. Switch off the device: Release the On / Off switch.

10. After ﬁ nishing work, pull the mains plug from the plug socket and disconnect the

extension cable from the device.

11. Clean the device after each use in the manner described in the "Cleaning, Storage

and Maintenance" chapter.