EASYmaxx N1C-100JS Originalanleitung Seite 26

EN
■ PLEASE NOTE: The actual vibration strength may differ from the fi gures which
are quoted in these instructions when using the device. This may have the
following causes:
– non-designated use,
– incorrect operation,
– insuffi cient maintenance.
■ To reduce the risks posed by vibrations, comply with the following instructions:
– If possible, do not operate the device in cold ambient temperatures.
– Keep your body and in particular your hands warm in cold ambient
temperatures.
– Take suffi cient breaks and during the breaks move or loosen your hands and
fi ngers to get the blood fl owing through them.
■ If you experience an unpleasant sensation or the colour of the skin on your
hands changes while you are using the device, stop performing the work
with the device immediately!
■ Danger posed by loud noises! It is imperative to wear appropriate hearing protec-
tion when working and in the vicinity of the switched-on device, in areas in which the
noise level exceeds 85 dB(A). Limit the length of exposure where possible. If in spite
of hearing protection any kind of discomfort arises, stop work immediately and check
the hearing protection to establish whether it fi ts and works properly. Make sure that
it provides an appropriate level of protection for the noise level which is produced by
the device which is used.
■ Always keep the handle and the extra grip dry, clean and free of grease to ensure that
the device can be held securely and fi rmly during use.
■ Danger of tripping! Make sure that the connected mains cable or extension cable
does not present a trip hazard.
NOTICE – Risk of Damage to Material and Property
■ The device should only be used if it has been correctly assembled! Check before each
use whether the brush has been attached to the main unit correctly and securely!
■ Only use brushes with a maximum diameter of 100 mm.
■ Always test the device fi rst on a small, inconspicuous spot.
■ Switch off the device and pull the mains plug out of the plug socket if an error occurs
during operation or before a thunderstorm. Do not use the device if it has malfunc-
tioned or been dropped in water.
■ Protect the device from heat sources, naked fl ames, sub-zero temperatures, persis-
tent moisture, wet conditions and impacts.
■ Use only original spare parts from the manufacturer.
■ Only use and store the device in an ambient temperature of from 0 °C to 40 °C.
02978_DE-EN-FR-NL_A5_V2.indb 26 02978_DE-EN-FR-NL_A5_V2.indb 26
26
14.05.2018 11:14:14 14.05.2018 11:14:14