EASYmaxx N1C-100JS Originalanleitung Seite 23

4) Power Tool Use and Care
Do not overload the power tool. Only ever use the designated
■
power tool for the activity that is to be performed. With the
appropriate power tool, you will work better and more safely in
the specifi ed power range.
Do not use a power tool whose switch is defective. Any
■
power tool that cannot be controlled with the switch is dangerous
and must be repaired.
Pull the mains plug out of the plug socket and / or remove
■
a detachable battery before any device settings are made,
tool bits are changed or the power tool is put to one side.
This preventive measure reduces the risk of starting the power
tool accidentally.
Store idle power tools out of the reach of children. Do not
■
allow people who are unfamiliar with the power tool or have
not read these instructions to operate the power tool. Power
tools are dangerous in the hands of inexperienced people.
Handle power tools and tool bits with care. Check whether
■
moving parts function perfectly and do not jam and check
whether parts are broken or damaged in such a way that
the function of the power tool is impaired. Have damaged
parts repaired before using the power tool. Many accidents
are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cut-
■
ting tools with sharp cutting edges are less likely to bind and are
easier to control.
Use the power tool, tool bits etc. in accordance with these
■
instructions. Take account of the working conditions and
the work to be performed. Use of power tools for operations
other than those intended could result in a hazardous situation.
5) Service
■ Have the power tool repaired only by a qualifi ed expert
using only genuine replacement parts. This will ensure that
the safety of the power tool is maintained.
02978_DE-EN-FR-NL_A5_V2.indb 23 02978_DE-EN-FR-NL_A5_V2.indb 23
23 EN
14.05.2018 11:14:14 14.05.2018 11:14:14