Vivanco ACS 22AA Bedienungsanleitung Seite 3

battery packs. It also charges high-performance
battery packs quickly and reliably. lt is fitted with a
power supply unit which facilitates electricity supply
through the mains.
In the case of totally discharged battery packs the
voltage established can deviate briefly from that
given on the battery pack's nameplate.
Starting up
First of all, insert the connector plug of the mains
adapter into the input socket of the charger and then
supply power from the mains supply system. The red
»Power« LED indicates readiness to operate.
Charging
1. Use the sliding switch on the left side to
determine whether 2 or 4 battery packs are to
be charged simultaneously.
2. Insert 2 or 4 AA batteries with + at the top
(see marking in battery compartment). The
»Charge/Ready« control Iamp turns red,
indicating that charging has begun. Once the
battery packs have been fully charged the
charger switches automatically to trickle
charging and the »Charge/Ready« control
Iamp changes to green. The fully charged
battery packs can now be removed.
Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg,
hotline@vivanco.de
3