Westfalia 97 42 53 Bedienungsanleitung Seite 9

Measuring
1. Put the valve connection (1) on the tyre valve. To do this, please
press down the lever to unlock the clamping mechanism. As soon
as you release the lever, the plug clamps at the valve.
2. Read the existing pressure from the manometer (3).
On the outer rim of the scale, you can read the value in the unit
bar (1 bar = 100 kPa).
On the inner rim of the scale, you can read the value in the unit
psi.
Filling
1. Connect the quick coupling connector (2) of the tyre inflator with
a compressed air supply.
2. Put the valve connection (1) on the tyre valve.
3. Press the trigger (5), compressed air flows into the tyre.
The moment you are filling in the air, the manometer (3) shows a
pressure that is a little bit higher than the actual tyre pressure. When
you release the trigger, you can read the actual tyre pressure on the
manometer.
Hint: Increasing the tyre pressure by max. 0.2 bar, will have a
positive effect on the fuel consumption of your car.
Deflation of Air
If the tyre pressure is too high, use the deflation button (6) and
slowly reduce the air pressure to the desired value.
Technical Data
Pressure Range: from 0 to 12 bar
Diameter of Pressure Gauge (3): 6 cm
Tube Length (4): approx. 41 cm
Operation
9