Philips FastCare Compact GC6704 Gebrauchsanleitung Seite 17

Press 2 sec.
CALC CLEAN
2 min.
4
Press and hold the CALC-CLEAN button for
2 seconds until you hear short beeps.
Note: The Calc-Clean container has been
designed to collect scale particles and
hot water during the Calc-Clean process.
It is perfectly safe to rest the iron on this
container during the entire process.
5 During the Calc-Clean process, you hear
short beeps and a pumping sound.
Note: Hot water and steam come out from the
soleplate during Calc-Clean process.
6 Wait approximately 2 minutes for the
appliance to complete the process. When
the Calc-Clean process is completed, the
iron stops beeping and the CALC-CLEAN
light stops flashing.
7
Wipe the iron with a piece of cloth and put
it back on the base station.
Caution: The iron is hot.
8 As the Calc-Clean container becomes hot
during the Calc-Clean process, wait about 5
minutes before you touch it. Then carry the
Calc-Clean container to the sink, empty it
and store it for future use.
9
If necessary, you can repeat steps 1 to 8.
Make sure that you empty the Calc-Clean
container before you start the Calc-Clean
process.
ENGLISH 17