Quax LINEA 54 04 53 Series Bauanleitung Seite 39

LINEA
54 04 53xxXL
Hinge N (low back)
is mounted on the
inner door
Step 10 : Use one door EB7 (becomes the inner door), three hinges N and six wood screws E
Push the hinges (N) into the drillings of the door (EB11) and tighten with two wood screws (E).
Step 11 : Use the parts AB1 of step 1, AB2 of step 2, AB3 of step 3, AB4 of step 4, AB5 of step 5, AB8
of step 8 and three wood screws G
Push the bottom (AB2) onto the wooden dowels of intermediate side (AB5). Push the wood screws (G) into
the holes beneath the bottom and tighten them in the intermediate side. Push the long fi xed shelf (AB3)
with its wooden dowels into the drillings and over the connectors of the intermediate side. Tighten the ec-
centrics. Push the small fi xed shelf (AB4) with its wooden dowels into the holes and over the connectors of
the intermediate side. Tighten the eccentrics. Push the end sides (AB8 LH and RH) with their connectors
in the drillings and over the wooden dowels of the fi xed shelves and the bottom. Tighten the eccentrics.
Push the top (AB1) with its connectors in the holes and over the wooden dowels of the end and intermedi-
ate side. Tighten the eccentrics.
Kleerkast met drie draaideuren
Schrankwand mit drei Türen
Armoire avec 3 portes battantes
Wardrobe with three doors
Quax
First dreams
®
First steps
39