Melitta Solo & perfect milk Bedienungsanleitung Seite 20

Before using for the fi rst time
Figure F
1 Air intake valve
2 Air intake pipe
3 Control dial
4 Connection for milk hose
5 Connecting piece
6 Milk froth / hot water nozzle
Symbol on the Cappuccinatore
selection switch
Setting for warm milk
Setting for hot water
Setting for milk froth
Display
Lights up
Flashes
Lights up
Flashes
Lights up
Flashes
Lights up
Flashes
20
Operating Instructions: Melitta
The appliance is ready
for operation.
Appliance is heating
up or coffee is being
dispensed.
Change the Melitta
®
PRO AQUA fi lter
cartridge
Filter change in pro-
cess
Fill the water tank
Insert the water tank
Empty drip tray and
coffee grounds con-
tainer
Insert the drip tray
and coffee grounds
container
1 bean: mild
Lights up 2 beans: normal
3 beans: strong
Fill bean container;
fl ashing stops after
Flashes
dispensing the next
coffee.
Lights up Cleaning the device
Integrated cleaning
Flashes
programme is running
Lights up Descale the appliance
Integrated descaling
Flashes
programme is running
Froth standby
or:
Air is in the system.
Lights up
Turn valve switch 11
clockwise until the
stop until water fl ows
out of the appliance.
Milk froth or hot water
Flashes
dispensing in process.
Solo & Perfect Milk | 1830-0618 | 2018-08
® ®