CO/Tech Dust Extractor RDC100J Bedienungsanleitung Seite 3

Dust Extractor
Art.no 40-9467 Model RDC100J
Please read the entire instruction manual before using the product and then save
it for future reference. We reserve the right for any errors in text or images and any
necessary changes made to technical data. In the event of technical problems or other
queries, please contact our Customer Services (see address details on the back).
Safety
• This product must not be used by anyone (including children) suffering from
physical or mental impairment. This product should not be used by anyone that
has not read the instruction manual unless they have been instructed in its use by
someone who will take responsibility for their safety.
• Never attempt to repair or modify the product in any way.
• The product must never be used if it is in any way damaged or malfunctioning.
• The mains lead should be checked regularly. Never use the product if the mains
lead or plug is damaged. If the mains lead is damaged in any way it must be
replaced by a qualified electrician.
• Never expose the product to high temperatures, heavy vibrations, blows,
dampness or moisture.
• The product must only be used with a residual current device which trips at 30 mA.
• Make sure that the voltage marked on the rating plate corresponds with your
mains supply voltage.
• Never immerse the product or any of the accessories in water.
• Note: This appliance is for indoor use only.
• Warning: Make sure that anyone using the product has read and understood
the instruction manual and is aware of all the potential hazards.
• Warning: This product is not designed for the extraction of environmentally
hazardous waste.
• Warning: The product is only designed for the extraction of dry materials.
Product safety symbols
Read the entire instruction manual before use.
CE approved safety goggles, a dust mask and ear protectors must be
used at all times.
3