Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
12. Solve problems
Problem
Flash device is
switched on, but has
no function
Flash shows functions,
but flash triggering not
possible
LC Display shows E0
LC Display shows E1
LC Display shows E2
LC Display shows E3
LC Display shows
Possible reason
The powerpack is not
or only insufficiently
charged/defect.
The fuse is defective.
Battery pack or flash
unit defective.
Flash pipe burned
through.
Problem with operation
temperature
No further triggering
possible, cycles .
System overheating.
Internal voltage inside
the flash is too high
Overload indication,
flash cycles become
slower and slower.
Remedy
Charge the powerpack/
replace the powerpack.
Replace the fuse, see
"Replacing the fuse".
Contact our service
department
If necessary have the
flash tube replaced by
a skilled electrician.
Contact our service
department
Contact our service
department
Switch off the device
for approx. 10 minutes.
Danger of overloading
Contact our service
department
Switch off the device
for approx. 10 minutes.
Danger of overloading
41
Werbung
Inhaltsverzeichnis
