Trigger The Flash; Transportation And Storage - WalimeXPro Powershooter 600 Gebrauchsanleitung

Prepare flash trigger through remote receiver (optional)
NOTE
Please note the user information of the remote receiver manufacturer.
• Plug the cable from the radio remote control into the 3.5 mm connecting
socket for the sync cable.
• The USB-socket allows you to use the radio remote trigger walimex pro
Operator USB PLUs
• Plug the radio transmitter on to the flash shoe mount of the camera.
10. Trigger the flash
• Switch on device.
See Switch the device on and off.
• Press the test button (on the Battery Pack or the radio remote trigger) to
check the system.
• Trigger flash according to the prepared type of flash trigger.
See Prepare and adjust flash trigger.

11. Transportation and storage

• Switch off device.
See Switch the device on and off.
• Let the device cool down completely.
WARNING
Fire danger through hot parts. Let the device cool down completely.
• Demount reflector and all power and connecting cables.
• Clean the device if necessary. See
Cleaning. Mount the protection cap.
• Put the device and all demounted elements into the original styrofoam box
and carry and store them according to the equirements in the technical
specifications. See Technical specifications.
40