Quax 54 05 17 Serie Handbuch Seite 24

LOUISE
TRENDY
Quax Quax
First dreams
® ®
First steps
Step 3 : Use the top 1, the bottom 5, the endsides 2L and 2R, both intermediate sides 4, sixteen connectors B,
and twenty wooden dowels A
Tighten ten connectors (B) into the holes underneath the top (1). Tighten three connectors (B) into the holes on
the inside of the endsides (2L and 2R). Push six wooden dowels (A) in the holes provided at the ends of the bot-
tom (5). Push two wooden dowels (A) in the drillings on the upper and lower side of the intermediate sides (4).
Step 4 : Use the parts fo step 3, both back profi les 3, six eccentrics C and four wood screws F
Insert three eccentrics (C) in the drillings at the ends of the bottom (5). Push the end sides (2L and 2R) with their
connectors in the holes and over the wooden dowels of the bottom. Tighten the eccentrics. Push the intermedi-
ate sides (4) with their wooden dowels into the holes of the bottom. Push the wood screws (F) into the holes at
the underside of the bottom and screw them into the intermediate sides (4). Push the back profi les (3) with their
wooden dowels into the holes of the bottom.
24
Bureel met drie open vakken
Kinderbed met verstelbare bodem
54 05 17xx
01 01 43XX
Büro mit drei offene Fächer
KInderbett mit verstelbarer Boden
Bureau avec trois casiers
Lit enfant avec fond réglable
Desk with 3 open compartments
Babybed with adjustable bottom