Quax 54 05 17 Serie Handbuch Seite 23

TRENDY
54 05 17xx
4. Assembling the desk
Step 1 : Use both long cross bars 7, both short cross bars 8, both connecting bars 9, eight eccentrics E,
four eccentrics K, both legs 6A and 6B, eight connectors D and four connectors J
Push two eccentrics (E) in the provided drillings on the inside of the long cross bars (7) and the short cross
bars (8). Push two eccentrics (K) in the provided drillings beneath the connecting bars (9). Tighten two
connectors (D) in the provided holes on the upper inside of the legs (6A and 6B). Tighten a connector (J)
in the provided holes on the middle inside of the legs (6A and 6B).
Step 2 : Use the parts of step 1
Push a connecting bar (9) with its wooden dowels into the holes and over the connectors of the legs (6A
and 6B). Push a leg (6A and 6B) with its connectors in the drillings and over the wooden dowels of the
short cross bars (8). Tighten the eccentrics. Push a leg frame with his connectors in the holes and on the
wooden dowels of the long cross bars (7). Tighten the eccentrics. Repeat with the other leg frame.
Bureel met drie open vakken
Büro mit drei offene Fächer
Bureau avec trois casiers
Desk with 3 open compartments
Quax Quax
First dreams First dreams
® ®
First steps First steps
23