4. CONNECTIONS
1
Screw terminals
Screw terminals for connecting an external control unit.
2
Analog line outputs 1 to 4
Balanced XLR jacks for connecting PA amplifiers.
3
Strain relief
4
Analog line inputs channel A and B
Balanced XLR jacks for connecting the signal source
(e.g. preamplifier, mixer).
5
Power input
Connect the supplied power unit here.
6
USB port
USB port (type B) for connecting a PC. The unit is
controlled via the supplied PC software, i.e. presets can
be stored, transfered and managed.
13/15
00054084.DOC, Version 1.0