Operating Elements And Connections - Omnitronic DXO-26I Bedienungsanleitung

4. OPERATING ELEMENTS AND CONNECTIONS

1 LED level meter inputs A and B
3-digit level indication for the inputs channel A and B. The
orange LED LIMIT lights up when the headroom is
reached. The red LED CLIP lights in case of overload.
2
LED level meter outputs 1 to 6
3-digit level indication for the outputs 1 to 6. The orange
LED LIMIT lights up when an output is limited by the
limiter. The red LED CLIP lights in case of overload.
4 Analog line outputs 1 to 6
Balanced XLR jacks for connecting PA amplifiers.
5
Strain relief
6 Analog line inputs channel A and B
Balanced XLR jacks for connecting the signal source
(e.g. preamplifier, mixer).
3 Selector switches MUTE with LED
For muting the outputs 1 to 6. Press to activate the
muting. The corresponding red LED lights.
7 Power input
Connect the supplied power unit here.
8 USB port
USB port (type B) for connecting a computer. The unit is
controlled via the supplied software, i.e. presets can be
stored, transfered and managed.
15/19 00053692.DOC, Version 1.1