Troubleshooting - Sony Playstation 2 Kurzanleitung

Accessories
When purchasing optional accessories, be sure to purchase those that are compatible
with this model of the PlayStation
About the DVD remote control (for PlayStation
When purchasing a new DVD remote control, choose model number
SCPH-10420 E which does not include the IR receiver unit (for PlayStation
About multitaps
Only the multitap (for PlayStation
with this console. Do not connect multitap products with other model numbers to the
console as this may result in damage to the console.
Accessories not compatible with this model
The following accessories for the PlayStation
console are not compatible with this model of the PlayStation
Model number
SCPH-10350 E
SCPH-10090 E
SCPH-1070 E
SCPH-10040 E
SCPH-70110 E
SCPH-10110 E
-
16
2 console.
®
2)
®
2) (SCPH-70120 E) (sold separately) can be used
®
console and the PlayStation
®
2 console.
®
Product name
Network Adaptor (Ethernet) (for PlayStation
Multitap (for PlayStation 2)
®
Multitap
Vertical stand (for PlayStation 2)
®
Vertical stand (for PlayStation 2)
®
Horizontal stand (for PlayStation 2)
®
Products that use the S400 i.LINK connector

Troubleshooting

Go through this section if you experience difficulty in operating the PlayStation
console. Should any problem persist, call the PlayStation
listed on your guarantee card for assistance.
Check the following items first:
2).
• Check that the console is turned on. Press the ?/1/RESET button to turn on the
®
console (the ?/1 indicator will turn green).
• Check that the AC power cord is fully inserted into the electrical outlet.
• Check that the cables are correctly and securely connected.
Picture
There is no picture on the TV screen.
, Switch the input mode of the TV as appropriate for the input connector in use on
2
®
the console.
, There may be a problem with the cable. Try using another cable that is
compatible with the PlayStation
2)
®
The picture is unstable.
, Set "Component Video Out" to "Y Cb/Pb Cr/Pr" in the System Configuration
menu when connecting the console to the component AV inputs on a TV
the supplied AV cable to make the setting, and then connect to the TV using the
component AV cable (sold separately).
* When connecting the console to a TV that only supports RGB input, set
" "
Out to RGB
, When the console is connected to a VCR or a DVD recorder, copy protection
used by some DVDs may cause the picture to become unstable, or the picture
may get brighter or darker. If this happens, connect the console directly to the
TV.
, If the console is connected to a TV or cable
scan (480p), no video will be displayed when "Progressive" is set to "On" under
(Setup) t "Screen Setup" in the DVD player's control panel. In this case,
2 console.
®
"
.
*1
that does not support progressive
2
®
service line at the number
®
*
. Use
"
Component Video