Quax SUNNY Handbuch Seite 45

SUNNY
54 04 47xx-3D
Step 7 : Use the upper crossbar 3 of step 1, the right side 2R of step 2, the parts of step 3 and fi ve ec-
centrics D
Insert three eccentrics (D) into the drillings underneath the bottom. Insert one eccentric (D) into the dril-
ling at the bottom of the rear leg. Push the construction over the connectors of the side and tighten the
eccentrics. Insert one eccentric (D) into the drilling of the upper crossbar (3). Push the crossbar over the
connector of the side and tighten the eccentric.
Step 8 : Use the left side 2L of step 2, the parts of step 7, both outer backs 4A, the inner back 4B, the con-
necting profi le 16 and fi ve eccentrics D
Slide an outer back (4A) in the slots of the rear leg and the upper crossbar. Next the inner back (4B) and
fi nally the connection profi le (16) and the remaining outer back (4A). Insert three eccentrics (D) into the
drillings underneath the bottom. Insert one eccentric (D) into the drilling at the bottom of the rear leg. Insert
one eccentric (D) into the drilling of the upper crossbar (3). Push the left side (2L) with its connectors into
the holes of the construction and tighten the eccentrics.
Kleerkast met drie draaideuren
Schrankwand mit drei Türen
Armoire avec 3 portes battantes
Wardrobe with three doors
Quax
First dreams
®
First steps
45