Quax SUNNY Handbuch Seite 30

SUNNY
Quax
First dreams
®
First steps
Step 2 : Use both end panels 1, both sides 2 of step 1, four short wood screws B, four long wood screws C, the
Allen key SW4 and four gliders K
Hold both sides (2) with their drillings in front of the openings of a leg frame (1). Push four short wood screws (B)
into the upper drillings of the side frame and tighten them slightly with the wrench (SW4). Push four long wood
screws (C) into the lower drillings of the side frame and tighten them slightly. Now position the other leg frame and
repeat the action. Stick two furniture glides (K) at the bottom of the head and foot ends.
Step 3 : Use the parts of step 2, six bottom supports E and two wood screws M
Push the bottom supports (E) with their pin into the provided drillings on the sides (2). Make sure that all of the
bottom supports are positioned at the same height, one and the same of the three possible positions (X-Y or Z).
Caution: Rotate the middle bottom support and tighten in the center of the sides with the wood screw M.
30
54 01 45xx
Omvormbaar bed 120x60 cm
Konvertierbar Bett 120x60 cm
Lit convertible 120x60 cm
Convertible bed 120x60 cm