Quax CAMILLE Handbuch Seite 23

CAMILLE
76 10 06 0xx
4. Assembling the desk
Bureel met drie laden
Schreibtisch mit drei Schubladen
Step 1 : Use the left side B, three drawer
sliders l, six wood screws h and six con-
nectors b
Fix the connectors (b) in the provided open-
ings of the left side (B). Hold the drawer
sliders (i) on their provided place. Push the
wood screws (h) in the openings of the slid-
ers and fi x them in the end side.
Step 2 : Use the intermediate side C, three drawer
sliders j, six wood screws h and six connectors b
Fix the connectors (b) in the provided openings of
the intermediate side (C). Hold the drawer sliders
(j) on their provided place. Push the wood screws
(h) in the openings of the sliders and fi x them in
the end side.
Step 3 : Use the parts of step 1, the four frontal cross-
bars O, the lower dorsal crossbar M, the upper dorsal
crossbar L, six wooden dowels a and six eccentrics c
Insert the wooden dowels (a) and the eccentrics (c) in
the provided openings of all croosbars (O, M and L).
Push all crossbars with their dowels into the drillings
and over the connectors of the left side and tighten
the eccentrics.
Bureau avec trois tiroirs
Desk with three drawers
Quax Quax
First dreams First dreams
® ®
First steps First steps
23