Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
diagrams
1 tab
2 filter
3 lid
C FILLING WITHOUT THE HOPPER
1 Remove the lid.
2 Squeeze the catches inwards, to unlock the hopper, and lift it out.
3 Fill with at least 1 cup of water, but not above max.
4 Squeeze the catches inwards, lower the hopper into the kettle, then release the catches.
1 SWITCHING ON
5 Put the stand on a stable, level surface.
6 Plug the stand into the wall socket.
7 Put the kettle on the stand.
8 Move the switch to 1.

0 SWITCHING OFF

9 When the water boils the kettle will switch off.
10 To switch off manually, move the switch to 0.
11 Lifting the kettle off the stand will also switch the kettle off.
C GENERAL
12 When you lift the kettle, you may see moisture on the stand. Don't worry – it's the steam
used to switch off automatically, which then condenses and escapes via vents under the
kettle.
13 You may see some discolouration on the floor of the kettle. Again, don't worry – it's due to
the bonding of the element to the kettle floor.
F USING WITH INSUFFICIENT WATER
14 This will shorten the life of the element. A boil-dry cut-out will switch the kettle off.
15 You must then remove the kettle from its stand to reset the cut-out.
16 Sit the kettle on the work surface till it's cold.
C CARE AND MAINTENANCE
17 Unplug the stand from the wall socket, and let the kettle cool down fully before cleaning.
18 Wipe the kettle, inside and out, with a damp cloth
19 Squeeze the catches inwards, to unlock the hopper, and lift it out.
20 Grip the tab on top of the filter, press down and back, to release it, and lift it out.
21 Rinse the filter under a running tap while brushing with a soft brush.
22 Fit the bottom of the filter into the slot at the bottom of the spout
23 Press the filter towards the spout, to lock it into the top of the spout.
24 Squeeze the catches inwards, lower the hopper into the kettle, then release the catches.
25 Replace the lid.
, descale regularly
26 Descale regularly, (at least monthly. Use a descaler suitable for use in plastic products (most
products have plastic parts). Follow the instructions on the package of descaler.
, Products returned under guarantee with faults due to scale will be subject to a repair charge.
ENVIRONMENTAL PROTECTION
W
To avoid environmental and health problems due to hazardous substances in electrical and
electronic goods, appliances marked with this symbol mustn't be disposed of with unsorted
municipal waste, but recovered, reused, or recycled.
4 catches
5 hopper
6 button
7 handle
3
8 switch
9 light
10 stand

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis