urmet 1092 Bedienungsanleitung Seite 21

DAY/NIGHT – CAMERA OPERATION CHANGE ACCORDING TO VARIATION OF LIGHT PRESENT IN
The camera usually captures color images, but under poor light conditions it automatically switches its
operation mode from "color" to "black/white". In this way the captured image quality is optimized. Selecting
DAY/NIGHT, you can choose from the options EXT, AUTO (automatic), COLOR and B/W (black and
white).
EXT – (Default: Option highly recommended)
This option selects the automatic mode switching COLOR / BLACK&WHITE and the time in seconds of the
transition. The switching in black and white and the activation of the infrared lighting is synchronized by the
CDS.
DN (DELAY)
ND (DELAY)
RETURN
COLOR
With this option camera images are always in color mode and the camera does not switch in Night mode
(B/W). During the night or under conditions of poor illumination, with the IR illumination, images are in black
and white anyway.
B/W
With this option, camera images are always in black/white mode. Select B/W option to access the following
submenu:
BURST
IR SMART
RETURN
Option
BURST
IR SMART
This function enables a filter to reduce the image noise. Options available: OFF (to unable the function),
LOW, MIDDLE e HIGH.
DS1092-524
THE SCENE
D&N EXT
█■■■■■■■■■3
█■■■■■■■■■3
RET
D&N B&W
OFF
OFF
RET
Value
If set to ON, the colour burst is present even if the camera
ON÷ OFF
is in black/white mode.
The IR SMART function must be used with the B/W
options and allows you to select a taken scene area which
the camera adjusts the brightness automatically in.
ON÷ OFF
If ON, the camera adjusts the brightness on the selected
area in its submenus (LEVEL and AREA).
Description
NR
21