Denon DN-508MXA Benutzerhandbuch Seite 10

Using the Web Interface
Important: To use the web interface, both DN-508MXA and your computer must be
connected to the same network. We recommend connecting the Ethernet Port and your
computer to a network switch or router using standard Ethernet cables. If your computer is
wirelessly connected to your router, connect just DN-508MXA to that router. Alternatively,
connect DN-508MXA's Ethernet Port directly to a computer using an Ethernet crossover
cable.
To open the DN-508MXA web interface, on your computer, open a web browser.
•
If DN-508MXA is connected directly to a computer, go to
browser. You may have to enter the operator password. There is no default password,
but if you have already set one, you will have to enter it here.
•
If DN-508MXA is connected to a network switch or router (wirelessly or wired), use the
Menu button and the Volume/Sel knob to do the following:
i. Press Menu to enter the Menu.
ii. Select and enter 2. System, then Ethernet, then IP Address, and then the Auto
setting (you may have to enter the administrator password).
iii. Set Auto to On, and select Yes when asked if you want to apply the change.
iv. Press the Mute/Back button to return to the previous page, and then select IP
Address again. The display will now show a maximum 12-digit IP address. Enter this
address into your web browser as http://###.###.###.###. You may have to enter the
administrator password. The default administrator password is adminpwd.
To use the controls shown in the web interface:
•
Pages: Click the Output, Input, or Settings button at the top of the window to view each
page in the web interface below.
•
Faders: Click and drag a fader to set its level. Alternatively, click the dB field below it,
enter a value with your computer keyboard, and then click elsewhere in the page.
•
Menus: Click a menu, and then click an option to select it.
•
Buttons: Click a button to select it.
•
Checkbox: Click a checkbox to select or deselect it.
•
Text Field: Click a text field, enter a name with your computer keyboard, and then click
elsewhere on the page.
Important: In order to make changes in the web interface, first click the lock icon at the top of
the page. You will need to enter the Administrative password to unlock the page to make
changes. The default Admin password is adminpwd. Once you have finished editing, you can
lock the page again to prevent further changes.
10
http://192.168.0.1 in your web