5.3 Software installation
For controlling the crossover a software program on CD-ROM is included. Insert the CD into
your CD-ROM drive. After reading in the CD the automatic installation routine should start. If
not, browse the CD-ROM and click the file [Setup.msi] under Windows or [Omnitronic
DXOControl.pkg] under Mac. Then follow the instructions of the installation program. You do
not have to remove any older version; it will be removed automatically.
Installation screens Windows and Mac OS X
Notes
In order to install the control software you must log on to your computer as administrator or user with
•
administrator rights.
If you have downloaded the installation package from the internet, extract the files for a proper
•
installation.
As drivers and software are constantly being developed, your installation screens and procedures may
•
vary slightly from those described in this manual. We recommend to go regularly to
www.omnitronic.com
5.4 Connecting a computer
Connect the crossover's USB port to your computer via the supplied USB connection cable. The
DXO-24S is compatible with PC and Mac computers. A matching driver for the connection via the USB
interface is automatically installed together with the software. As soon as the unit is connected to a
computer, the USB interface will be recognized and is ready for operation.
Notes
Always use the same USB port on your computer to avoid device detection problems.
•
The device driver is included in the installation package: [adspusb.cat].
•
in order to download updates and further product improvements.
17/19
00054084.DOC, Version 1.1