Elektro Maschinen HDEm 401 Hobby Line Bedienungsanleitung Seite 11

E N
INDEX
1 Main constructive components
2 General safety advice
Connection of water supply pipe
3
High pressure pipe connection
4
Electrical connection of appliance
5
We wish to thank you for choosing our machine. We are confident that the high quality of our machine will meet with your
satisfaction and appreciation and that your pressure washer will give you long-lasting service. Before starting to use your
machine, make sure to read with care this manual, which has been purposely drawn up to provide you with all the necessary
information for proper use of the machine, in compliance with basic safety requirements.
1
MAIN COMPONENTS (Fig. 1)
1) Power plug
2) Main switch
3) Water supply rapid attachment
4) Filter
5) Foam nozzle
6) Nozzle jet
7) Spray gun
8) Spray gun safety device
9) Water delivery attachment
10) High pressure pipe
11) Instructions booklet
12) Foam sprayer holder
13) Turbo nozzle (optional)
2
SAFETY PRECAUTIONS
Do not use the device in the vici-
nity of persons, unless they are
wearing the necessary protective
garments.
High pressure jets may be dangerous
if used incorrectly, the jet must never
be directed on persons, live electrical
appliances, including the appliance
itself. Never use the jet to clean your
own garments or footwear.
The high pressure of the water
generated and connection to the
electricity supply constitute parti-
cularly serious danger risks.
Carefully read the user
instructions before starting
the machine for the first
time.
warnings.
Follow the safety
6 Appliance switch on
Appliance switch off
7
Accessories
8
Maintenance and repairs
9
10 Trouble shooting guide
The appliance must be used solely by personnel trained
in its use and specifically authorized to use it.
The user manual must be made available to all users.
Do not subject the machines to any modifications which
may jeopardize personal safety.
Using extensions, check the minimum section of the
individual cables (see paragraph entitled "Connection
to the mains appliances").
Install the extensions in such a way as not to alter the
protection class of the appliance.
In the event of the use of extensions, the plug and socket
must be of waterproof type.
The use of unsuitable extension leads may constitute
a danger risk.
Your electrician can give you the necessary information
on the protection classification.
The electrical system to which the appliance is con-
nected must be realized in compliance with the laws of
the country of installation. The presence of a differential
magnetothermal switch is necessary with a sensitivity
of equivalent to 30 mA, above the power socket or
the system.
Only put the appliance into operation providing that
all components are free of defects.
Firstly check the mains attachment wire, the high pres-
sure pipe, the spraying device and the body.
Do not tread on the high pressure pipe; do not pull,
bend or twist it.
Do not shift the appliance by pulling it by the high
pressure pipe.
Never operate with a defective high pressure pipe, but
always replace with original spare.
The high pressure pipe must be homologated for the
permitted working overpressure of the appliance.