Herunterladen Inhalt Inhalt Diese Seite drucken

Operating Determinations; Installation; Operation - EuroLite BSL-10 Bedienungsanleitung

Belt strobe chain
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Do not operate the strobe-lightchain without protective lamp shields! "Replace every broken shield."
Never touch the plug's contact pins! Danger of electric shock at unplugged plug.
Please consider that damages caused by manual modifications to the device are not subject to warranty.
Keep away children and amateurs!

OPERATING DETERMINATIONS

This device is a lighting chain for creating decorative effects. This product is only allowed to be operated with
an alternating voltage of 230 V, 50 Hz.
The lighting chain is splash-proof (protection-degree IP44) and can therefore be used inside and outside.
Do not shake the device. Avoid brute force when installing or operating the device.
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
This device must only be operated in an altitude between -20 and 2000 m over NN.
Never use the device during thunderstorms. Over voltage could destroy the device. Always disconnect the
device during thunderstorms.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
This lighting chain must never be electrically connected with another chain.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.

INSTALLATION

Unpack the lighting chain and unroll it.
Install the lighting chain at the desired installation-spot.
Connect the device to the mains with the power-plug.
Make sure that the outlet is in a dry area. The lighting chain must never be covered with any object.

OPERATION

After you connected the lighting chain to the mains, the lamps start burning.
Never touch the plug's contact pins! Danger of electric shock at unplugged plug.
CAUTION!
CAUTION!
9/10
00075619, Version 1.0

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis