Names and Functions of Parts
The port replicator is equipped with the same connection terminals as the
computer (with the exception of the headphone jack, audio-in jack, and infra
red communication port). It allows your peripheral devices to function ex
actly as if they were connected directly to the computer. (Refer to "Names
and Functions of Parts" in the "Operating Instructions" accompanying the
computer.)
fpC^ard Eject Buttons]
f Parallel Port
(Serial Port
Front/Right Side
[ Cap HoldeT
The protective cap from the expansion bus
connector should be placed here when the
port replicator is connected to the computer.
[Display Port)
(External Keyboard Port]
'This functions as a ventilation opening when
the port replicator is connected to the computer.
Do not obstruct the airflow by placing objects
on top of it.
Card SlotT)
External Mouse Port)
(Security Lock ]
/
IPC-IN ConnertoTj
Expansion Bus Connector]
This connects to the expansion bus connec
tor on the bottom of the computer.
Be sure to keep it covered with the supplied
protective cap when the port replicator is not
connected to the computer.
Lever)
Pull up on the lever to
release the computer.
E^^ansion Bus Connector
Protective Cap
{accompanying the port
replicator)