Alarm Control Unit Monitoring - DELTA DORE TYDOM 2.0 Installationsanleitung

5. Personalising TYDOM 2.0

5.10 Alarm control unit monitoring

Monitoring is used to trigger a call if TYDOM 2.0 does not receive information
from the alarm control unit for more than 4 hours. This function, activated by
default is configurable by calling the installation.
To disable this function:
• Call TYDOM 2.0 and enter your code.
• From the main menu, type #81 then type 0
To enable this function:
• From the main menu, type #81 then type 1.
.
52