Memorizing Stations Automatically; Btm (Best Tuning Memory) Function; Memorizing Only The Desired Stations; Receiving The Memorized Stations - Sony XR-3690RDS Bedienungsanleitung

2
Press and hold either side of the SEEK/
MANU button.
Release the button when the desired station
is received.
SEEK
MANU
For lower
frequencies
PREVENT ACCIDENTS!
When tuning in during driving, use the
automatic tuning and the memory preset
tuning instead of the manual tuning.
Memorizing Stations
Automatically

— BTM (Best Tuning Memory) Function

This function selects from the currently
received band the stations with the strongest
signals and memorizes them in order of their
frequency.
1
Select the desired band.
FM
FM1 n FM2n FM3 n FM1
BTM
2
PTY
Press the button for more than
two seconds.
• When there is no preset number indicated
on the display window, stations will be
stored on all preset number buttons on the
currently selected band.
• When there is a preset number indicated on
the display window, the unit will store
stations on all preset number buttons from
the one currently displayed.
For example, when you select FM2 and preset
number 3 is displayed,
the operation will start from preset number 3 on FM2, and
will stop at preset number 6 on FM3.
Actual total number
Memorizing Only the
Desired Stations
SEEK
1
MANU
For higher
frequencies
2
3
The number of the pressed preset number
button appears in the display window.
FM1
Up to 6 stations on each band (FM1, FM2 and FM3) can
be stored on the preset number buttons in the order of your
choice. Therefore, 18 stations can be memorized on FM.
If you try to store another station on the same preset
number button, the previously stored station will be
erased.
Receiving the Memorized
Stations
1
2
Note
If you press the preset number button for more than two
seconds, the currently received station will be memorized.
To receive the previously memorized station, make sure
that the preset number button is pressed only momentarily.
Sony XR-3690RDS (
Select the desired band.
FM
FM1 n FM2n FM3 n FM1
Tune in the station which you wish to
store on the preset number button.
Press and hold the desired preset
number button ( to
1
about two seconds until you hear a beep
tone.
ST
1 1 0 4 3 0
Select the desired band.
FM
FM1 n FM2n FM3 n FM1
Press momentarily the preset number
button ( to ) on which the
1 6
desired station is stored.
E
,F,G,I) 3-810-679-12 (2)
) for
6
EN
7