Operation; Connections - Pioneer DDJ-SX Kurzanleitung

Operation

Wait until all connections between devices have been completed
before connecting the AC adapter.
Be sure to turn off the power and unplug the AC adapter from the
power outlet before making or changing connections between
devices.
Refer to the operating instructions for the component to be
connected.
Only use the AC adapter included with this unit.
Power is supplied to this unit by the AC adapter.
Connect this unit and the computer directly using the included USB
cable.
A USB hub cannot be used.

Connections

1 Connect headphones to one of the [PHONES]
terminals.
8
En
2 Connect powered speakers, a power amplifier,
components, etc., to the [MASTER OUT 1] or [MASTER
OUT 2] terminals.
To output the sound from the [BOOTH] terminals, connect speak-
ers or other devices to the [BOOTH] terminals.
For details on connecting the input/output terminals, see the
Operating Instructions.
3 Connect this unit to your computer via a USB cable.
4 Turn on the computer's power.
5 Connect the power plug to the AC adapter.
Slide the power plug into the AC adapter's guide rails as shown on the
diagram and press in until a click is heard.
R L
Powered speaker, etc