Operation - Pioneer DDJ-SP1 Bedienungsanleitung

Browser section
1
• BACK
— UTILITY
5
4
1 DECK button
Press:
Selects the deck to be used.
The [DECK] button lights when deck 3 or deck 4 is selected. It does
not light when deck 1 or deck 2 is selected.
[SHIFT] + press:
Selects and opens the [REC] panel, [DJ-FX] panel or [SP-6] panel.
2 Rotary selector
Turn:
The cursor in the library or on the [CRATES] panel moves up and down.
Press:
The cursor moves between the [CRATES] panel and library each time
the rotary selector is pressed.
3 LOAD PREPARE (AREA) button
Press:
Loads tracks to the [Prepare] panel.
[SHIFT] + press:
Selects and opens the [Files] panel, [Browse] panel, [Prepare] panel
or [History] panel.
4 LOAD button
Loads the selected track onto the currently selected deck.
5 BACK button
Press:
The cursor moves between the [CRATES] panel and library each time
the button is pressed.
Press for over 1 second:
Switches to the utilities mode. For details on the utilities mode, see
Changing this unit's settings (p.7).
[SHIFT] + press:
Switches the Serato DJ layout.
Main unit side panel
1 2
DIMMER MODE
1 USB port
Connect to a computer.
! USB hubs cannot be used.
2 Kensington security slot
3 DIMMER switch
ON: Sets the LED's brightness to dim.
OFF: Sets the LED's brightness to bright.
! Power consumption can be decreased by setting the LED's
brightness to dim.
Disconnect the USB cable connected to this unit before switching
the [DIMMER] switch from the [ON] position to the [OFF] position.
The indicators will not get brighter if the switch is set to the [OFF]
position while the USB cable is connected.
1
3 4
PANEL SELECT
2
LOAD
PREPARE
3
VIEW AREA
4
LOAD LOAD
SHIFT
3
System setup example
When using in combination with a DJ mixer
SYNC
DDJ-SP1
Audio cable
Analog player
DJ mixer
DJM-900SRT, etc.
Audio cable
DJ player
When using in combination with a DJ controller
SYNC
DDJ-SP1
1/ 2X 2X
1 2
10 10
9 9
8 8
7 7
6 6
5 5
4 4
3 3
2 2
1 1
0 0
0 0
DJ Controller
DDJ-S1, etc.

Operation

Starting the system
The computer and Serato DJ-certifiable DJ controller or DJ mixer must
be connected beforehand.
! For instructions on operating the Serato DJ software and the Serato
DJ-certifiable DJ mixer or DJ controller, see their respective operat-
ing instructions.
1 Connect the Serato DJ-certifiable DJ mixer or DJ
controller to the computer by USB cable.
2 Turn on the computer's power.
3 Turn on the power of the Serato DJ-certifiable DJ
mixer or DJ controller.
4 Launch Serato DJ.
! When using Windows 7
From the Windows [Start] menu, click the [Serato DJ] icon under
[All Programs] > [Serato] > [Serato DJ].
! For Mac OS X
In Finder, open the [Applications] folder, then click the [Serato DJ]
icon.
USB cable
USB cable
Computer
Audio cable
Analog player
Audio cable
DJ player
USB cable
Computer
USB cable
5
En