Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
LOCATION
Clock / alarm and
Indoor temperature area
Outdoor temperature area
REMOTE SENSOR
The main unit can collect data from up to 3 sensors.
To set up the sensor:
1. Open the battery compartment (see FIG 3).
2. Select a channel then press RESET.
3. Close the battery door.
4. Place the sensor within 30 m (98 ft) of the main unit
using the table stand or wall mount.
TIP
Ideal placements for the sensor would be in any
location on the exterior of the home at a height of not
more than 5 ft and which can shield it from direct sunlight
or wet conditions for an accurate reading.
MEANING
Main unit batteries low
Sensor batteries low
150cm(5ft)
NOTE Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures below
freezing.
SENSOR DATA TRANSMISSION
To search for a sensor:
Press and hold
+ MODE.
4
Werbung
Kapitel
Inhaltsverzeichnis
