English - Kenwood BL530 series Benutzerhandbuch

Use your blender for soups, sauces,
drinks, pâtés, mayonnaise, dressings
etc. Use your mill (if supplied) for
milling herbs, nuts and coffee beans.
safety
G
CAUTION: Blending very hot
liquids may result in hot liquid
and steam being forced
suddenly past the lid or filler
cap. Allow the liquid to cool
or reduce the quantity and
select a lower speed if
available. Protect your hands
with a cloth or oven gloves
when handling the hot goblet
and lid.
G
Switch off and unplug:
before fitting or removing parts
G G
after use
G G
before cleaning.
G G
G
Keep hands and utensils out of the
blender when it's on the power unit.
G
Don't touch the sharp blades.
G
Don't let children or infirm people
use the machine unsupervised.
G
Never use a damaged machine. Get
it checked or repaired: see 'service'.
G
Never use an unauthorised
attachment.
G
Never leave the machine on
unattended.
G
Don't let children play with the
machine.
G
When removing the blender from the
power unit:
wait until the blades have
G G
completely stopped;
don't accidentally unscrew the
G G
goblet from the blade unit.
G
Never run the blender empty.
G
Only use the machine for its
intended domestic use.
G
Always unplug your blender
when not in use.
G
Only operate the blender with the lid
in place.

English

before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of the machine.
G
This machine complies with
European Economic Community
Directive 89/336/EEC.
before using for the first time
1 Remove all packaging.
2 Wash the parts: see 'cleaning'.
key
blender
filler cap
dual action locking lid
lid seal
glass goblet
sealing ring
blade unit
pulse control
speed control
power unit
cord storage
mill (if supplied)
blade unit
sealing ring
jar
sprinkler lid
to use your blender
1 Fit the sealing ring into the blade unit
- ensuring the seal is located
correctly. Leaking will occur if
the seal is damaged or not
fitted correctly.
2 Screw the goblet onto the blade
unit.
3 Put your ingredients into the goblet.
4 Push the lid seal onto the underside
of the lid.
5 Fit and lock the filler cap in the lid,
by turning one position
6 Fit the lid to the goblet and turn
the filler cap to
2
.
to lock.