On/Off Switch; Technical Data - AEG PHE 5670 Bedienungsanleitung

1. In order to clean or replace the polishing head, press
button (3).
2. The polishing head can then be removed easily.
3. Applying slight pressure will help the cleaned or
replaced polishing head to lock into place.

On/Off switch

Use the lock (4) to prevent the appliance from being accidentally switched on.
1. Check the polishing head once again for secure installation before using it.
2. Press the lock to slide the switch to the I or 0 position.
Cleaning
CAUTION:
• Do not immerse the device in water. This could destroy the electronics.
• Do not use sharp or abrasive cleaning agents.
1. Switch off the appliance before cleaning.
2. You may wipe the housing of the device with a slightly damp cloth.
Roller
• Remove the polishing head as described above.
• The polishing head and the housing can be easily cleaned with a brush.
• You may also clean the polishing head with hot water.
• Use a disinfectant spray for hygienic cleaning.

Technical Data

Model: ......................................................................................................................................PHE 5670
Net weight: ......................................................................................................................................111 g
Battery: .......................................................................................................2x 1.5 V Type "AA" / "R6"
The right to make technical and design modifications in the course of continuous product
development remains reserved.
This device complies with all current CE directives, such as electromagnetic compatibility
and low voltage directive and is manufactured according to the latest safety regulations.
English
33