Display Description; Turning On The Instrument; Safety; Irt Technology - Berner 219048 Bedienungsanleitung

Display Description

13. Low Battery Indicator
14. High Emissivity
15. Medium Emissivity
16. Low Emissivity
17. Hold Reading
18. Dew Point Temperature
19. Surface Temperature
20. Warning Symbol
21. Degree Fahrenheit
22. Degree Celsius
23. Ambient Temperature
24. Relative Humidity

Turning On the Instrument

To turn the instrument on, press the trigger button. The meter will start up with the last settings
that were used.

Safety

If the housing is opened, remember that some internal capacitors may still hold
potentially lethal voltages even after the device has been switched off.
In the event of errors or unusual operation, stop using the device and ensure that it
cannot be used until it has been carefully checked out and repaired.

IRT Technology

An infrared thermometer detects the infrared radiation that an object emits. The sensor
determines how much infrared radiation the object is giving off and the internal microprocessor
converts that reading into a temperature reading. Using this method the thermometer can
measure an object's temperature without touching the object. The laser-pointer builds a circle and
only used to aim the target.

Preparation

Do not subject the instrument to extreme temperature variations. This can impair the accuracy of
the instrument.
Avoid heavy impacts/dropping the instrument.
Avoid covering the temp/humidity sensor, infrared sensor or the laser pointers.
21